Example video title will go here for this video

WASHINGTON — The National Weather Service (NWS) confirmed multiple tornadoes touched down in Maryland on Friday afternoon and evening. An EF-0 tornado was on the ground for around 1 minute in Olney, Md. It had peak winds of 80 mph. An EF-1 tornado was on the ground for about 9 minutes from Charlotte Hall to Benedict Md. It had peak winds of 90 mph.

Here's a look into the process the National Weather Service takes to determine the strength of a tornado.

After potential tornado moves through an area, the  National Weather Service  will send a crew to survey the damage. They will determine if the damage was caused by an actual tornado or something else, possibly straight-line winds or thunderstorm damage.

The surveyors will look at the pattern of the damage. If it is scattered, then it was likely a tornado or thunderstorm damage. If debris has all fallen in the same direction, then it was likely straight-line wind damage.   

RELATED: Families cleaning up after trees topple homes in Montgomery County severe weather

If the type of damage turns out to be tornadic, the next step is to determine the strength of the tornado. NWS uses the Enhanced Fujita (EF) Scale to rate a tornado between EF-0 and EF-5 depending on estimated wind speeds and damage. Below is a look at the EF Scale and the corresponding wind speeds.

To assess the damage, NWS runs through its list of 28 different Damage Indicators (DI). Each DI has different Degrees of Damage (DoD) that help pinpoint how strong the tornado was. 

Lets use a school building as an example. 

If the NWS was assessing the damages to a school they would first check that the building meets the following requirements.

Then the NWS will look for the following damage to the structure. It decides whether the damage falls within the upper bound (UB), lower bound (LB), or the expected (EXP) wind speeds. Those values for a school building can be seen in the following chart and graph.

Once the DoD has been determined, NWS will evaluate the possible wind speeds that could have caused that type of damage. This process is then repeated on different structures until a final rating can be reached.

Regarding the tornado in Olney, trees were used as the DI. The NWS reported that the DoD was dozens of snapped and downed trees which lead to rating the tornado as an EF-0. For the Charlotte Hall to Benedict tornado trees and one- or two-family residences were used as the DI. The NWS reported that the DoD was uprooted and snapped trees as well as damage to siding and broken windows which lead to rating the tornado as an EF-1.

Notifications can be turned off anytime in the browser settings.